One character, three different parts
Two quotes for “the same” FPGA can be hundreds of dollars apart — and both can be honest. The difference is often a single character in the part number: the speed grade. On AMD Xilinx parts it is the number right after the device name, as in the XC7K410T-2FFG900I: the “-2” is the speed grade.
A speed grade is factory binning. The silicon is the same; each lot is tested and sorted by the maximum performance it can hold. -3 is the fastest — and the most expensive and hardest to find. -2 is the workhorse: most production designs are timed and closed on -2. -1 is the slowest and the cheapest.
What actually changes
The grade sets real clock limits. On Zynq-7000, for example, the dual-core ARM processing system tops out at 667 MHz in -1, 766 MHz in -2 and 866 MHz in -3. The programmable logic scales the same way: a design that closes timing comfortably in -2 may have no headroom left in -1. Take the XC7Z020-1CLG400I — that “-1” is not a detail, it is a different performance class from its -2 and -3 siblings.
How boards get sunk
The classic failure looks like this: the BOM specifies -2. A quote arrives for -1 at a much better price, and the suffix is treated as a footnote. The boards are built, the firmware runs — and the design fails timing at full speed, intermittently, in the field. By then the production run is finished and the cheap quote has become the most expensive one.
The one rule that is always safe
A faster grade can always replace the grade your design specifies. A slower grade can never be substituted without re-timing and re-qualifying the design. If your design is timed on -2, a -3 part is a safe (if pricier) drop-in. Going the other way is a gamble with your production run.
Before you pay
- Compare the complete part number on the quote against your BOM — digit by digit, suffix included. Our part-number decoder shows how much information hides in the suffix.
- Ask for photos of the exact lot’s labels before payment, and check the grade printed on the label against your order.
- When a quote is far below the others, check the suffix first — the discount is usually hiding there.
ICCPOWER checks the full part number — grade included — on every lot we source, and sends photos of the exact lot before you pay. Browse the Kintex-7 family or send us your shortage list.


