The XC7Z020 is the workhorse of AMD Xilinx’s Zynq-7000 family: a dual-core ARM Cortex-A9 processor paired with 85K logic cells on one chip, built for industrial control, communications and embedded boards. But buyers searching for it hit the same trap again and again — two XC7Z020 part numbers that look nearly identical and are not interchangeable. The difference sits in two suffixes: the speed grade (-1 or -2) and the package (CLG400 or CLG484). This guide decodes both, with today’s supply picture for each variant. (Sources: AMD Zynq-7000 product data; DigiKey listings checked November 18, 2026.)
Reading the part number is straightforward once the pattern is clear. In XC7Z020-2CLG484I, “XC7Z020” is the device, “-2” is the speed grade, “CLG484” is the package, and “I” is the industrial temperature grade (-40°C to 100°C junction). The speed grade sets the ARM core clock: -1 runs at 667 MHz, -2 at 766 MHz. The package sets the footprint: CLG400 is a 400-ball CSPBGA (17 x 17 mm), CLG484 is a 484-ball package with more user I/O. A -1 part cannot simply replace a -2 part if the design needs the higher clock, and a CLG400 part cannot drop into a CLG484 footprint — the ball maps differ, so a package change means a board change.
Today’s supply picture, checked November 18, 2026: the XC7Z020-2CLG484I (https://iccpower.com/product/xc7z020-2clg484i/) shows no stock at DigiKey, with a 52-week factory lead time; the next quantities, 74 pieces, are expected April 26, 2027, with a further 10 pieces expected May 10, 2027. The XC7Z020-1CLG400I (https://iccpower.com/product/xc7z020-1clg400i/) also shows no stock at DigiKey, with a 52-week lead time. Both variants are effectively on factory order, not on the shelf.
What this means for buyers
- Check the suffix before you quote a lead time. A buyer who asks for “XC7Z020” without the speed grade and package is asking for four different parts. Confirm -1 or -2 and CLG400 or CLG484 first — the wrong suffix is a redesign, not a substitution.
- Speed grade is a performance decision, not a price tier. The -2 grade runs the ARM cores faster, which matters for compute-heavy designs; if your design closes timing at -1 speeds, the -1 grade is the same silicon at a lower clock, but do not assume a -1 part will run -2 firmware timing without checking.
- Package is a board decision. CLG484 offers more I/O than CLG400, but the two footprints are not pin-compatible. If your board is laid out for one, switching packages means a new layout — budget that into any second-source plan.
- Mind the temperature suffix too. The “I” in these part numbers is the industrial grade; the “C” commercial grade (for example the XC7Z020-1CLG400C used on the Zybo Z7-20 development board) is a different part with a narrower temperature range. Industrial designs should not accept a commercial-grade substitute without a design review.
- Both Z020 variants are on 52-week factory lead times today, so plan around expected arrival dates, not shelf stock. If your build needs either variant before the expected quantities arrive in April–May 2027, check per-lot availability now — availability is confirmed lot by lot, with photos of the actual lot provided before payment.
- If you need more logic than the Z020 offers, the step up inside the same family is the XC7Z045-2FFG900I (https://iccpower.com/product/xc7z045-2ffg900i/), which showed 6 pieces at DigiKey the same day — but it is a different device and package, so treat it as a redesign option, not a drop-in.
Need the XC7Z020 in a specific speed grade and package? Send us your shortage list or Request a Quote. We reply to every inquiry within 24 hours.


